With more than 50 years of combined experience in managing a wide array of power plant projects, the team in our power generation division is known for delivering impeccable engineering, fabrication, construction, inspection, repair, maintenance and refurbishment services for thermal power plants, co-generation power plants, combined-cycle power plants.
Coupled with our expertly engineered upgrading solutions to lower emissions for all boiler systems and offer greater fuel efficiency, we have the parts and maintenance solutions needed to keep your boiler system operating safely and reliably at its peak condition, whether you are running a Doosan HRSG or a boiler from another manufacturer.
HFS provides inspection resources, technology and software to provide the most thorough and comprehensive boiler inspections unlike any other boiler inspection company. HFS will provide the plant O&M team the ability to PRIORITIZE and MONITOR corrective action, tracking the status of all repair recommendations. HFS will provide detailed reports with analysis and predictive failure information to determine an accurate current and future state of their boiler systems, and repair recommendations to help minimize unscheduled (forced) outages. HFS ensures its clients a thorough and proper inspection is done on every outage, scheduled or unscheduled. And finally, HFS ensures repairs are done correctly with no "short cut" that would jeopardize the boiler integrity.
Basic Inspection Service
Visual inspection of pressure parts, gas path, steel structure and piping. HFS will carry-out evaluation of the results and presenting Inspection report with recommendations.
Additional Options Include
Type of Boilers Include
A visual survey of the general HRSG condition, external casing, internal gas-side mechanical parts and auxiliary equipment. Readily accessible pressure part components are visually inspected. HISE recommends performing such a general inspection in addition to the basic inspections stipulated by local regulatory requirements.
Time frame requirement: 2 - 3 days HRSG accessibility.
In order to prevent forced outages, periodic inspections should be conducted during scheduled outages. This allows the identification of component damage in the earliest stages - when there is still time to schedule a cost-effective repair.
HFS recommends a general inspection every 1 to 2 years and a more detailed inspection every 3 to 5 years. In order to optimize the overall plant availability, it is important to align these inspections with those of the gas turbine. Therefore, the detailed inspection should coincide with a gas turbine planned outage, e.g. the major or hot gas path inspection.
Detailed HRSG Inspections
Includes all the general inspection steps plus a more detailed visual inspection of all accessible pressure parts. This visual inspection will identify any areas of concern that require subsequent non-destructive examination (NDE) to be performed by HFS qualified NDE technician.
Time frame requirement: 4 - 6 days HRSG accessibility.
Pre-Outage
During the Outage
Post-Outage
HFS provides a comprehensive selection of boiler repair services.
Our services include: -
A clean boiler saves you money, because it burns more efficiently and lasts longer. HFS has always stressed the importance of regular and complete boiler cleaning as part of its clients' ongoing preventive maintenance and fuel-efficiency programs.
Our boiler cleaning services include:
Your current boiler system can benefit from a burner retrofit, control upgrade supplemental heat recovery equipment or fuel conversion which can all serve to increase efficiency or reduce emissions.
The retrofitting and upgrading method to be adopted should be decided based on the results of inspection and design review.
HFS can evaluate your current boiler or HRSG unit and recommend the right upgrade or retrofit package for your system.
Some of the retrofits services provided by HFS include: -
To provide a genuine one stop option for all your inspection and assessment needs, HFS also offers basic or advanced NDE/DE techniques to support inspections or follow-on repair works including: -
Additional Services
Regardless of the ancillary equipment required by your boiler or HRSG system, every part you need is available through the spare parts division of HFS. Each part we offer is engineered and manufactured specifically to suit the original specifications of your equipment.
HFS is dedicated to providing our clients with replacement parts of the highest quality delivered in a timely manner. To benefit our clients, HFS maintains a variety of stock items. These parts are available for immediate delivery, and on very short notice.
Trust us to supply the exact replacement parts you need. You will never go wrong with our professional product knowledge. Not only can we supply OEM replacement parts such as valves, gaskets and tubes, we also provide a wide range of specialty replacement parts and upgrade items.
Just let us know the parts you require.
Based on our experience, many users of boiler / HRSG units have never been properly trained. To meet productivity targets and emissions regulations, it is crucial to operate and monitor the essential equipment in the right way every day.
By conducting on-site personnel training seminars which can be tailored for specific site requirements and providing the services of technical personnel to assist our clients' operations teams in unit start-up, we have been able to ensure that all operating procedures are properly and efficiently implemented.
Below are some of the training programs that HFS can provide on-site to suit our clients' schedule:-
With more than 50 years of combined experience in managing a wide array of power plant projects, the team in our power generation division is known for delivering impeccable engineering, fabrication, construction, inspection, repair, maintenance and refurbishment services for thermal power plants, co-generation power plants, combined-cycle power plants.
Coupled with our expertly engineered upgrading solutions to lower emissions for all boiler systems and offer greater fuel efficiency, we have the parts and maintenance solutions needed to keep your boiler system operating safely and reliably at its peak condition, whether you are running a Doosan HRSG or a boiler from another manufacturer.
HFS provides inspection resources, technology and software to provide the most thorough and comprehensive boiler inspections unlike any other boiler inspection company. HFS will provide the plant O&M team the ability to PRIORITIZE and MONITOR corrective action, tracking the status of all repair recommendations. HFS will provide detailed reports with analysis and predictive failure information to determine an accurate current and future state of their boiler systems, and repair recommendations to help minimize unscheduled (forced) outages. HFS ensures its clients a thorough and proper inspection is done on every outage, scheduled or unscheduled. And finally, HFS ensures repairs are done correctly with no “short cut” that would jeopardize the boiler integrity.
Basic Inspection Service
Visual inspection of pressure parts, gas path, steel structure and piping. HFS will carry-out evaluation of the results and presenting Inspection report with recommendations.
Additional Options Include
Type of Boilers Include
A visual survey of the general HRSG condition, external casing, internal gas-side mechanical parts and auxiliary equipment. Readily accessible pressure part components are visually inspected. HISE recommends performing such a general inspection in addition to the basic inspections stipulated by local regulatory requirements.
Time frame requirement: 2 – 3 days HRSG accessibility.
In order to prevent forced outages, periodic inspections should be conducted during scheduled outages. This allows the identification of component damage in the earliest stages – when there is still time to schedule a cost-effective repair.
HFS recommends a general inspection every 1 to 2 years and a more detailed inspection every 3 to 5 years. In order to optimize the overall plant availability, it is important to align these inspections with those of the gas turbine. Therefore, the detailed inspection should coincide with a gas turbine planned outage, e.g. the major or hot gas path inspection.
Detailed HRSG Inspections
Includes all the general inspection steps plus a more detailed visual inspection of all accessible pressure parts. This visual inspection will identify any areas of concern that require subsequent non-destructive examination (NDE) to be performed by HFS qualified NDE technician.
Time frame requirement: 4 – 6 days HRSG accessibility.
Pre-Outage
During the Outage
Post-Outage
HFS provides a comprehensive selection of boiler repair services.
Our services include: -
A clean boiler saves you money, because it burns more efficiently and lasts longer. HFS has always stressed the importance of regular and complete boiler cleaning as part of its clients’ ongoing preventive maintenance and fuel-efficiency programs.
Our boiler cleaning services include:
Your current boiler system can benefit from a burner retrofit, control upgrade supplemental heat recovery equipment or fuel conversion which can all serve to increase efficiency or reduce emissions.
The retrofitting and upgrading method to be adopted should be decided based on the results of inspection and design review.
HFS can evaluate your current boiler or HRSG unit and recommend the right upgrade or retrofit package for your system.
Some of the retrofits services provided by HFS include: -
To provide a genuine one stop option for all your inspection and assessment needs, HFS also offers basic or advanced NDE/DE techniques to support inspections or follow-on repair works including: -
Additional Services
Regardless of the ancillary equipment required by your boiler or HRSG system, every part you need is available through the spare parts division of HFS. Each part we offer is engineered and manufactured specifically to suit the original specifications of your equipment.
HFS is dedicated to providing our clients with replacement parts of the highest quality delivered in a timely manner. To benefit our clients, HFS maintains a variety of stock items. These parts are available for immediate delivery, and on very short notice.
Trust us to supply the exact replacement parts you need. You will never go wrong with our professional product knowledge. Not only can we supply OEM replacement parts such as valves, gaskets and tubes, we also provide a wide range of specialty replacement parts and upgrade items.
Just let us know the parts you require.
Based on our experience, many users of boiler / HRSG units have never been properly trained. To meet productivity targets and emissions regulations, it is crucial to operate and monitor the essential equipment in the right way every day.
By conducting on-site personnel training seminars which can be tailored for specific site requirements and providing the services of technical personnel to assist our clients’ operations teams in unit start-up, we have been able to ensure that all operating procedures are properly and efficiently implemented.
Below are some of the training programs that HFS can provide on-site to suit our clients’ schedule:-